Class SftpClient

keyFiles is null.

ArgumentOutOfRangeException

host is invalid.

-or-

username is null or contains only whitespace characters.

port is not within MinPort and MaxPort.

SftpClient(string, int, string, string)

Initializes a new instance of the SftpClient class.

public SftpClient(string host, int port, string username, string password)

Parameters

host string: Connection host.
port int: Connection port.
username string: Authentication username.
password string: Authentication password.

Exceptions

password is null.

ArgumentOutOfRangeException

host is invalid.

-or-

username is null or contains only whitespace characters.

port is not within MinPort and MaxPort.

SftpClient(string, string, params IPrivateKeySource[])

Initializes a new instance of the SftpClient class.

public SftpClient(string host, string username, params IPrivateKeySource[] keyFiles)

Parameters

host string: Connection host.
username string: Authentication username.
keyFiles IPrivateKeySource[]: Authentication private key file(s) .

Exceptions

keyFiles is null.

host is invalid.

-or-

username is null or contains only whitespace characters.

SftpClient(string, string, string)

Initializes a new instance of the SftpClient class.

public SftpClient(string host, string username, string password)

Parameters

host string: Connection host.
username string: Authentication username.
password string: Authentication password.

Exceptions

password is null.

host is invalid.

-or-

username is null contains only whitespace characters.

Properties

BufferSize

Gets or sets the maximum size of the buffer in bytes.

public uint BufferSize { get; set; }

Property Value

uint: The size of the buffer. The default buffer size is 32768 bytes (32 KB).

Remarks

For write operations, this limits the size of the payload for individual SSH_FXP_WRITE messages. The actual size is always capped at the maximum packet size supported by the peer (minus the size of protocol fields).

For read operations, this controls the size of the payload which is requested from the peer in a SSH_FXP_READ message. The peer will send the requested number of bytes in a SSH_FXP_DATA message, possibly split over multiple SSH_MSG_CHANNEL_DATA messages.

To optimize the size of the SSH packets sent by the peer, the actual requested size will take into account the size of the SSH_FXP_DATA protocol fields.

The size of the each individual SSH_FXP_DATA message is limited to the local maximum packet size of the channel, which is set to 64 KB for SSH.NET. However, the peer can limit this even further.

Exceptions

ObjectDisposedException: The method was called after the client was disposed.

IsConnected

Gets a value indicating whether this client is connected to the server and the SFTP session is open.

public override bool IsConnected { get; }

Property Value

bool: true if this client is connected and the SFTP session is open; otherwise, false.

Exceptions

ObjectDisposedException: The method was called after the client was disposed.

OperationTimeout

Gets or sets the operation timeout.

public TimeSpan OperationTimeout { get; set; }

Property Value

TimeSpan: The timeout to wait until an operation completes. The default value is negative one (-1) milliseconds, which indicates an infinite timeout period.

Exceptions

ObjectDisposedException: The method was called after the client was disposed.
ArgumentOutOfRangeException: value represents a value that is less than -1 or greater than MaxValue milliseconds.

ProtocolVersion

Gets sftp protocol version.

public int ProtocolVersion { get; }

Property Value

int

Exceptions

SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

WorkingDirectory

Gets remote working directory.

public string WorkingDirectory { get; }

Property Value

string

Exceptions

SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

Methods

AppendAllLines(string, IEnumerable<string>)

Appends lines to a file, creating the file if it does not already exist.

public void AppendAllLines(string path, IEnumerable<string> contents)

Parameters

path string: The file to append the lines to. The file is created if it does not already exist.
contents IEnumerable<string>: The lines to append to the file.

Remarks

The characters are written to the file using UTF-8 encoding without a byte-order mark (BOM).

Exceptions

path is null.

-or-

contents is null.

Client is not connected.

The specified path is invalid, or its directory was not found on the remote host.

The method was called after the client was disposed.

AppendAllLines(string, IEnumerable<string>, Encoding)

Appends lines to a file by using a specified encoding, creating the file if it does not already exist.

public void AppendAllLines(string path, IEnumerable<string> contents, Encoding encoding)

Parameters

path string: The file to append the lines to. The file is created if it does not already exist.
contents IEnumerable<string>: The lines to append to the file.
encoding Encoding: The character encoding to use.

Exceptions

path is null.

-or-

contents is null.

-or-

encoding is null.

Client is not connected.

The specified path is invalid, or its directory was not found on the remote host.

The method was called after the client was disposed.

AppendAllText(string, string)

Appends the specified string to the file, creating the file if it does not already exist.

public void AppendAllText(string path, string contents)

Parameters

path string: The file to append the specified string to.
contents string: The string to append to the file.

Remarks

The characters are written to the file using UTF-8 encoding without a Byte-Order Mark (BOM).

Exceptions

path is null.

-or-

contents is null.

Client is not connected.

The specified path is invalid, or its directory was not found on the remote host.

The method was called after the client was disposed.

AppendAllText(string, string, Encoding)

Appends the specified string to the file, creating the file if it does not already exist.

public void AppendAllText(string path, string contents, Encoding encoding)

Parameters

path string: The file to append the specified string to.
contents string: The string to append to the file.
encoding Encoding: The character encoding to use.

Exceptions

path is null.

-or-

contents is null.

-or-

encoding is null.

Client is not connected.

The specified path is invalid, or its directory was not found on the remote host.

The method was called after the client was disposed.

AppendText(string)

Creates a StreamWriter that appends UTF-8 encoded text to the specified file, creating the file if it does not already exist.

public StreamWriter AppendText(string path)

Parameters

path string: The path to the file to append to.

Returns

StreamWriter: A StreamWriter that appends text to a file using UTF-8 encoding without a Byte-Order Mark (BOM).

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: The specified path is invalid, or its directory was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

AppendText(string, Encoding)

Creates a StreamWriter that appends text to a file using the specified encoding, creating the file if it does not already exist.

public StreamWriter AppendText(string path, Encoding encoding)

Parameters

path string: The path to the file to append to.
encoding Encoding: The character encoding to use.

Returns

StreamWriter: A StreamWriter that appends text to a file using the specified encoding.

Exceptions

path is null.

-or-

encoding is null.

Client is not connected.

The specified path is invalid, or its directory was not found on the remote host.

The method was called after the client was disposed.

BeginDownloadFile(string, Stream)

Begins an asynchronous file downloading into the stream.

public IAsyncResult BeginDownloadFile(string path, Stream output)

Parameters

path string: The path.
output Stream: The output.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to output, may under certain conditions result in exceptions thrown by the stream.

Exceptions

output is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to perform the operation was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

BeginDownloadFile(string, Stream, AsyncCallback?)

Begins an asynchronous file downloading into the stream.

public IAsyncResult BeginDownloadFile(string path, Stream output, AsyncCallback? asyncCallback)

Parameters

path string: The path.
output Stream: The output.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to output, may under certain conditions result in exceptions thrown by the stream.

Exceptions

output is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to perform the operation was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

BeginDownloadFile(string, Stream, AsyncCallback?, object?, Action<ulong>?)

Begins an asynchronous file downloading into the stream.

public IAsyncResult BeginDownloadFile(string path, Stream output, AsyncCallback? asyncCallback, object? state, Action<ulong>? downloadCallback = null)

Parameters

path string: The path.
output Stream: The output.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.
state object: A user-provided object that distinguishes this particular asynchronous write request from other requests.
downloadCallback Action<ulong>: The download callback.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to output, may under certain conditions result in exceptions thrown by the stream.

Exceptions

ArgumentNullException: output is null.
ArgumentException: path is null or contains only whitespace characters.
ObjectDisposedException: The method was called after the client was disposed.

BeginListDirectory(string, AsyncCallback?, object?, Action<int>?)

Begins an asynchronous operation of retrieving list of files in remote directory.

public IAsyncResult BeginListDirectory(string path, AsyncCallback? asyncCallback, object? state, Action<int>? listCallback = null)

Parameters

path string: The path.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.
state object: A user-provided object that distinguishes this particular asynchronous write request from other requests.
listCallback Action<int>: The list callback.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Exceptions

ObjectDisposedException: The method was called after the client was disposed.

BeginSynchronizeDirectories(string, string, string, AsyncCallback?, object?)

Begins the synchronize directories.

public IAsyncResult BeginSynchronizeDirectories(string sourcePath, string destinationPath, string searchPattern, AsyncCallback? asyncCallback, object? state)

Parameters

sourcePath string: The source path.
destinationPath string: The destination path.
searchPattern string: The search pattern.
asyncCallback AsyncCallback: The async callback.
state object: The state.

Returns

IAsyncResult: An IAsyncResult that represents the asynchronous directory synchronization.

Exceptions

ArgumentNullException: sourcePath or searchPattern is null.
ArgumentException: destinationPath is null or contains only whitespace.
SshException: If a problem occurs while copying the file.

BeginUploadFile(Stream, string)

Begins an asynchronous uploading the stream into remote file.

public IAsyncResult BeginUploadFile(Stream input, string path)

Parameters

input Stream: Data input stream.
path string: Remote file path.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

If the remote file already exists, it is overwritten and truncated.

Exceptions

input is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to list the contents of the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

BeginUploadFile(Stream, string, AsyncCallback?)

Begins an asynchronous uploading the stream into remote file.

public IAsyncResult BeginUploadFile(Stream input, string path, AsyncCallback? asyncCallback)

Parameters

input Stream: Data input stream.
path string: Remote file path.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

If the remote file already exists, it is overwritten and truncated.

Exceptions

input is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to list the contents of the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

BeginUploadFile(Stream, string, AsyncCallback?, object?, Action<ulong>?)

Begins an asynchronous uploading the stream into remote file.

public IAsyncResult BeginUploadFile(Stream input, string path, AsyncCallback? asyncCallback, object? state, Action<ulong>? uploadCallback = null)

Parameters

input Stream: Data input stream.
path string: Remote file path.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.
state object: A user-provided object that distinguishes this particular asynchronous write request from other requests.
uploadCallback Action<ulong>: The upload callback.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

If the remote file already exists, it is overwritten and truncated.

Exceptions

input is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to list the contents of the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

BeginUploadFile(Stream, string, bool, AsyncCallback?, object?, Action<ulong>?)

Begins an asynchronous uploading the stream into remote file.

public IAsyncResult BeginUploadFile(Stream input, string path, bool canOverride, AsyncCallback? asyncCallback, object? state, Action<ulong>? uploadCallback = null)

Parameters

input Stream: Data input stream.
path string: Remote file path.
canOverride bool: Specified whether an existing file can be overwritten.
asyncCallback AsyncCallback: The method to be called when the asynchronous write operation is completed.
state object: A user-provided object that distinguishes this particular asynchronous write request from other requests.
uploadCallback Action<ulong>: The upload callback.

Returns

IAsyncResult: An IAsyncResult that references the asynchronous operation.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

When path refers to an existing file, set canOverride to true to overwrite and truncate that file. If canOverride is false, the upload will fail and EndUploadFile(IAsyncResult) will throw an SshException.

Exceptions

ArgumentNullException: input is null.
ArgumentException: path is null or contains only whitespace characters.
ObjectDisposedException: The method was called after the client was disposed.

ChangeDirectory(string)

Changes remote directory to path.

public void ChangeDirectory(string path)

Parameters

path string: New directory path.

Exceptions

path is null.

Client is not connected.

Permission to change directory denied by remote host.

-or-

A SSH command was denied by the server.

path was not found on the remote host.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

ChangePermissions(string, short)

Changes permissions of file(s) to specified mode.

public void ChangePermissions(string path, short mode)

Parameters

path string: File(s) path, may match multiple files.
mode short: The mode.

Exceptions

path is null.

Client is not connected.

Permission to change permission on the path(s) was denied by the remote host.

-or-

A SSH command was denied by the server.

path was not found on the remote host.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

Create(string)

Creates or overwrites a file in the specified path.

public SftpFileStream Create(string path)

Parameters

path string: The path and name of the file to create.

Returns

SftpFileStream: A SftpFileStream that provides read/write access to the file specified in path.

Remarks

If the target file already exists, it is first truncated to zero bytes.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: The specified path is invalid, or its directory was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

Create(string, int)

Creates or overwrites the specified file.

public SftpFileStream Create(string path, int bufferSize)

Parameters

path string: The path and name of the file to create.
bufferSize int: The maximum number of bytes buffered for reads and writes to the file.

Returns

SftpFileStream: A SftpFileStream that provides read/write access to the file specified in path.

Remarks

If the target file already exists, it is first truncated to zero bytes.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: The specified path is invalid, or its directory was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

CreateDirectory(string)

Creates remote directory specified by path.

public void CreateDirectory(string path)

Parameters

path string: Directory path to create.

Exceptions

path is null or contains only whitespace characters.

Client is not connected.

Permission to create the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

CreateText(string)

Creates or opens a file for writing UTF-8 encoded text.

public StreamWriter CreateText(string path)

Parameters

path string: The file to be opened for writing.

Returns

StreamWriter: A StreamWriter that writes text to a file using UTF-8 encoding without a Byte-Order Mark (BOM).

Remarks

If the target file already exists, it is overwritten. It is not first truncated to zero bytes.

If the target file does not exist, it is created.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: The specified path is invalid, or its directory was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

CreateText(string, Encoding)

Creates or opens a file for writing text using the specified encoding.

public StreamWriter CreateText(string path, Encoding encoding)

Parameters

path string: The file to be opened for writing.
encoding Encoding: The character encoding to use.

Returns

StreamWriter: A StreamWriter that writes to a file using the specified encoding.

Remarks

If the target file already exists, it is overwritten. It is not first truncated to zero bytes.

If the target file does not exist, it is created.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: The specified path is invalid, or its directory was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

Delete(string)

Deletes the specified file or directory.

public void Delete(string path)

Parameters

path string: The name of the file or directory to be deleted. Wildcard characters are not supported.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: path was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

DeleteDirectory(string)

Deletes remote directory specified by path.

public void DeleteDirectory(string path)

Parameters

path string: Directory to be deleted path.

Exceptions

path is null or contains only whitespace characters.

Client is not connected.

path was not found on the remote host.

Permission to delete the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

DeleteFile(string)

Deletes remote file specified by path.

public void DeleteFile(string path)

Parameters

path string: File to be deleted path.

Exceptions

path is null or contains only whitespace characters.

Client is not connected.

path was not found on the remote host.

Permission to delete the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

DeleteFileAsync(string, CancellationToken)

Asynchronously deletes remote file specified by path.

public Task DeleteFileAsync(string path, CancellationToken cancellationToken)

Parameters

path string: File to be deleted path.
cancellationToken CancellationToken: The CancellationToken to observe.

Returns

Task: A Task that represents the asynchronous delete operation.

Exceptions

path is null or contains only whitespace characters.

Client is not connected.

path was not found on the remote host.

Permission to delete the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

Dispose(bool)

Releases unmanaged and - optionally - managed resources.

protected override void Dispose(bool disposing)

Parameters

disposing bool: true to release both managed and unmanaged resources; false to release only unmanaged resources.

DownloadFile(string, Stream, Action<ulong>?)

Downloads remote file specified by the path into the stream.

public void DownloadFile(string path, Stream output, Action<ulong>? downloadCallback = null)

Parameters

path string: File to download.
output Stream: Stream to write the file into.
downloadCallback Action<ulong>: The download callback.

Remarks

Method calls made by this method to output, may under certain conditions result in exceptions thrown by the stream.

Exceptions

output is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to perform the operation was denied by the remote host.

-or-

A SSH command was denied by the server.

path was not found on the remote host.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

EndDownloadFile(IAsyncResult)

Ends an asynchronous file downloading into the stream.

public void EndDownloadFile(IAsyncResult asyncResult)

Parameters

asyncResult IAsyncResult: The pending asynchronous SFTP request.

Exceptions

The IAsyncResult object did not come from the corresponding async method on this type.

-or-

EndDownloadFile(IAsyncResult) was called multiple times with the same IAsyncResult.

Client is not connected.

Permission to perform the operation was denied by the remote host.

-or-

A SSH command was denied by the server.

The path was not found on the remote host.

A SSH error where Message is the message from the remote host.

EndListDirectory(IAsyncResult)

Ends an asynchronous operation of retrieving list of files in remote directory.

public IEnumerable<ISftpFile> EndListDirectory(IAsyncResult asyncResult)

Parameters

asyncResult IAsyncResult: The pending asynchronous SFTP request.

Returns

IEnumerable<ISftpFile>: A list of files.

Exceptions

The IAsyncResult object did not come from the corresponding async method on this type.

-or-

EndListDirectory(IAsyncResult) was called multiple times with the same IAsyncResult.

EndSynchronizeDirectories(IAsyncResult)

Ends the synchronize directories.

public IEnumerable<FileInfo> EndSynchronizeDirectories(IAsyncResult asyncResult)

Parameters

asyncResult IAsyncResult: The async result.

Returns

IEnumerable<FileInfo>: A list of uploaded files.

Exceptions

The IAsyncResult object did not come from the corresponding async method on this type.

-or-

EndSynchronizeDirectories(IAsyncResult) was called multiple times with the same IAsyncResult.

The destination path was not found on the remote host.

EndUploadFile(IAsyncResult)

Ends an asynchronous uploading the stream into remote file.

public void EndUploadFile(IAsyncResult asyncResult)

Parameters

asyncResult IAsyncResult: The pending asynchronous SFTP request.

Exceptions

The IAsyncResult object did not come from the corresponding async method on this type.

-or-

EndUploadFile(IAsyncResult) was called multiple times with the same IAsyncResult.

Client is not connected.

The directory of the file was not found on the remote host.

Permission to upload the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

Exists(string)

Checks whether file or directory exists.

public bool Exists(string path)

Parameters

path string: The path.

Returns

bool: true if directory or file exists; otherwise false.

Exceptions

path is null or contains only whitespace characters.

Client is not connected.

Permission to perform the operation was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

Get(string)

Gets reference to remote file or directory.

public ISftpFile Get(string path)

Parameters

path string: The path.

Returns

ISftpFile: A reference to ISftpFile file object.

Exceptions

SshConnectionException: Client is not connected.
SftpPathNotFoundException: path was not found on the remote host.
ArgumentNullException: path is null.
ObjectDisposedException: The method was called after the client was disposed.

GetAttributes(string)

Gets the SftpFileAttributes of the file on the path.

public SftpFileAttributes GetAttributes(string path)

Parameters

path string: The path to the file.

Returns

SftpFileAttributes: The SftpFileAttributes of the file on the path.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
SftpPathNotFoundException: path was not found on the remote host.
ObjectDisposedException: The method was called after the client was disposed.

GetLastAccessTime(string)

Returns the date and time the specified file or directory was last accessed.

public DateTime GetLastAccessTime(string path)

Parameters

path string: The file or directory for which to obtain access date and time information.

Returns

DateTime: A DateTime structure set to the date and time that the specified file or directory was last accessed. This value is expressed in local time.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

GetLastAccessTimeUtc(string)

Returns the date and time, in coordinated universal time (UTC), that the specified file or directory was last accessed.

public DateTime GetLastAccessTimeUtc(string path)

Parameters

path string: The file or directory for which to obtain access date and time information.

Returns

DateTime: A DateTime structure set to the date and time that the specified file or directory was last accessed. This value is expressed in UTC time.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

GetLastWriteTime(string)

Returns the date and time the specified file or directory was last written to.

public DateTime GetLastWriteTime(string path)

Parameters

path string: The file or directory for which to obtain write date and time information.

Returns

DateTime: A DateTime structure set to the date and time that the specified file or directory was last written to. This value is expressed in local time.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

GetLastWriteTimeUtc(string)

Returns the date and time, in coordinated universal time (UTC), that the specified file or directory was last written to.

public DateTime GetLastWriteTimeUtc(string path)

Parameters

path string: The file or directory for which to obtain write date and time information.

Returns

DateTime: A DateTime structure set to the date and time that the specified file or directory was last written to. This value is expressed in UTC time.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

GetStatus(string)

Gets status using statvfs@openssh.com request.

public SftpFileSystemInformation GetStatus(string path)

Parameters

path string: The path.

Returns

SftpFileSystemInformation: A SftpFileSystemInformation instance that contains file status information.

Exceptions

SshConnectionException: Client is not connected.
ArgumentNullException: path is null.
ObjectDisposedException: The method was called after the client was disposed.

GetStatusAsync(string, CancellationToken)

Asynchronously gets status using statvfs@openssh.com request.

public Task<SftpFileSystemInformation> GetStatusAsync(string path, CancellationToken cancellationToken)

Parameters

path string: The path.
cancellationToken CancellationToken: The CancellationToken to observe.

Returns

Task<SftpFileSystemInformation>: A Task<TResult> that represents the status operation. The task result contains the SftpFileSystemInformation instance that contains file status information.

Exceptions

SshConnectionException: Client is not connected.
ArgumentNullException: path is null.
ObjectDisposedException: The method was called after the client was disposed.

ListDirectory(string, Action<int>?)

Retrieves list of files in remote directory.

public IEnumerable<ISftpFile> ListDirectory(string path, Action<int>? listCallback = null)

Parameters

path string: The path.
listCallback Action<int>: The list callback.

Returns

IEnumerable<ISftpFile>: A list of files.

Exceptions

path is null.

Client is not connected.

Permission to list the contents of the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

ListDirectoryAsync(string, CancellationToken)

Asynchronously enumerates the files in remote directory.

public IAsyncEnumerable<ISftpFile> ListDirectoryAsync(string path, CancellationToken cancellationToken)

Parameters

path string: The path.
cancellationToken CancellationToken: The CancellationToken to observe.

Returns

IAsyncEnumerable<ISftpFile>: An IAsyncEnumerable<T> of ISftpFile that represents the asynchronous enumeration operation. The enumeration contains an async stream of ISftpFile for the files in the directory specified by path.

Exceptions

path is null.

Client is not connected.

Permission to list the contents of the directory was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

OnConnected()

Called when client is connected to the server.

protected override void OnConnected()

OnDisconnecting()

Called when client is disconnecting from the server.

protected override void OnDisconnecting()

Open(string, FileMode)

Opens a SftpFileStream on the specified path with read/write access.

public SftpFileStream Open(string path, FileMode mode)

Parameters

path string: The file to open.
mode FileMode: A FileMode value that specifies whether a file is created if one does not exist, and determines whether the contents of existing files are retained or overwritten.

Returns

SftpFileStream: An unshared SftpFileStream that provides access to the specified file, with the specified mode and read/write access.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

Open(string, FileMode, FileAccess)

Opens a SftpFileStream on the specified path, with the specified mode and access.

public SftpFileStream Open(string path, FileMode mode, FileAccess access)

Parameters

path string: The file to open.
mode FileMode: A FileMode value that specifies whether a file is created if one does not exist, and determines whether the contents of existing files are retained or overwritten.
access FileAccess: A FileAccess value that specifies the operations that can be performed on the file.

Returns

SftpFileStream: An unshared SftpFileStream that provides access to the specified file, with the specified mode and access.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

OpenAsync(string, FileMode, FileAccess, CancellationToken)

Asynchronously opens a SftpFileStream on the specified path, with the specified mode and access.

public Task<SftpFileStream> OpenAsync(string path, FileMode mode, FileAccess access, CancellationToken cancellationToken)

Parameters

path string: The file to open.
mode FileMode: A FileMode value that specifies whether a file is created if one does not exist, and determines whether the contents of existing files are retained or overwritten.
access FileAccess: A FileAccess value that specifies the operations that can be performed on the file.
cancellationToken CancellationToken: The CancellationToken to observe.

Returns

Task<SftpFileStream>: A Task<TResult> that represents the asynchronous open operation. The task result contains the SftpFileStream that provides access to the specified file, with the specified mode and access.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

OpenRead(string)

Opens an existing file for reading.

public SftpFileStream OpenRead(string path)

Parameters

path string: The file to be opened for reading.

Returns

SftpFileStream: A read-only SftpFileStream on the specified path.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

OpenText(string)

Opens an existing UTF-8 encoded text file for reading.

public StreamReader OpenText(string path)

Parameters

path string: The file to be opened for reading.

Returns

StreamReader: A StreamReader on the specified path.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

OpenWrite(string)

Opens a file for writing.

public SftpFileStream OpenWrite(string path)

Parameters

path string: The file to be opened for writing.

Returns

SftpFileStream: An unshared SftpFileStream object on the specified path with Write access.

Remarks

If the file does not exist, it is created.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadAllBytes(string)

Opens a binary file, reads the contents of the file into a byte array, and closes the file.

public byte[] ReadAllBytes(string path)

Parameters

path string: The file to open for reading.

Returns

byte[]: A byte array containing the contents of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadAllLines(string)

Opens a text file, reads all lines of the file using UTF-8 encoding, and closes the file.

public string[] ReadAllLines(string path)

Parameters

path string: The file to open for reading.

Returns

string[]: A string array containing all lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadAllLines(string, Encoding)

Opens a file, reads all lines of the file with the specified encoding, and closes the file.

public string[] ReadAllLines(string path, Encoding encoding)

Parameters

path string: The file to open for reading.
encoding Encoding: The encoding applied to the contents of the file.

Returns

string[]: A string array containing all lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadAllText(string)

Opens a text file, reads all lines of the file with the UTF-8 encoding, and closes the file.

public string ReadAllText(string path)

Parameters

path string: The file to open for reading.

Returns

string: A string containing all lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadAllText(string, Encoding)

Opens a file, reads all lines of the file with the specified encoding, and closes the file.

public string ReadAllText(string path, Encoding encoding)

Parameters

path string: The file to open for reading.
encoding Encoding: The encoding applied to the contents of the file.

Returns

string: A string containing all lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadLines(string)

Reads the lines of a file with the UTF-8 encoding.

public IEnumerable<string> ReadLines(string path)

Parameters

path string: The file to read.

Returns

IEnumerable<string>: The lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

ReadLines(string, Encoding)

Read the lines of a file that has a specified encoding.

public IEnumerable<string> ReadLines(string path, Encoding encoding)

Parameters

path string: The file to read.
encoding Encoding: The encoding that is applied to the contents of the file.

Returns

IEnumerable<string>: The lines of the file.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

RenameFile(string, string)

Renames remote file from old path to new path.

public void RenameFile(string oldPath, string newPath)

Parameters

oldPath string: Path to the old file location.
newPath string: Path to the new file location.

Exceptions

oldPath is null.

-or-

or newPath is null.

Client is not connected.

Permission to rename the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

RenameFile(string, string, bool)

Renames remote file from old path to new path.

public void RenameFile(string oldPath, string newPath, bool isPosix)

Parameters

oldPath string: Path to the old file location.
newPath string: Path to the new file location.
isPosix bool: if set to true then perform a posix rename.

Exceptions

oldPath is null.

-or-

or newPath is null.

Client is not connected.

Permission to rename the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

RenameFileAsync(string, string, CancellationToken)

Asynchronously renames remote file from old path to new path.

public Task RenameFileAsync(string oldPath, string newPath, CancellationToken cancellationToken)

Parameters

oldPath string: Path to the old file location.
newPath string: Path to the new file location.
cancellationToken CancellationToken: The CancellationToken to observe.

Returns

Task: A Task that represents the asynchronous rename operation.

Exceptions

oldPath is null.

-or-

or newPath is null.

Client is not connected.

Permission to rename the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

SetAttributes(string, SftpFileAttributes)

Sets the specified SftpFileAttributes of the file on the specified path.

public void SetAttributes(string path, SftpFileAttributes fileAttributes)

Parameters

path string: The path to the file.
fileAttributes SftpFileAttributes: The desired SftpFileAttributes.

Exceptions

ArgumentNullException: path is null.
SshConnectionException: Client is not connected.
ObjectDisposedException: The method was called after the client was disposed.

SetLastAccessTime(string, DateTime)

Sets the date and time the specified file was last accessed.

public void SetLastAccessTime(string path, DateTime lastAccessTime)

Parameters

path string: The file for which to set the access date and time information.
lastAccessTime DateTime: A DateTime containing the value to set for the last access date and time of path. This value is expressed in local time.

SetLastAccessTimeUtc(string, DateTime)

Sets the date and time, in coordinated universal time (UTC), that the specified file was last accessed.

public void SetLastAccessTimeUtc(string path, DateTime lastAccessTimeUtc)

Parameters

path string: The file for which to set the access date and time information.
lastAccessTimeUtc DateTime: A DateTime containing the value to set for the last access date and time of path. This value is expressed in UTC time.

SetLastWriteTime(string, DateTime)

Sets the date and time that the specified file was last written to.

public void SetLastWriteTime(string path, DateTime lastWriteTime)

Parameters

path string: The file for which to set the date and time information.
lastWriteTime DateTime: A DateTime containing the value to set for the last write date and time of path. This value is expressed in local time.

SetLastWriteTimeUtc(string, DateTime)

Sets the date and time, in coordinated universal time (UTC), that the specified file was last written to.

public void SetLastWriteTimeUtc(string path, DateTime lastWriteTimeUtc)

Parameters

path string: The file for which to set the date and time information.
lastWriteTimeUtc DateTime: A DateTime containing the value to set for the last write date and time of path. This value is expressed in UTC time.

SymbolicLink(string, string)

Creates a symbolic link from old path to new path.

public void SymbolicLink(string path, string linkPath)

Parameters

path string: The old path.
linkPath string: The new path.

Exceptions

path is null.

-or-

linkPath is null or contains only whitespace characters.

Client is not connected.

Permission to create the symbolic link was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

SynchronizeDirectories(string, string, string)

Synchronizes the directories.

public IEnumerable<FileInfo> SynchronizeDirectories(string sourcePath, string destinationPath, string searchPattern)

Parameters

sourcePath string: The source path.
destinationPath string: The destination path.
searchPattern string: The search pattern.

Returns

IEnumerable<FileInfo>: A list of uploaded files.

Exceptions

ArgumentNullException: sourcePath is null.
ArgumentException: destinationPath is null or contains only whitespace.
SftpPathNotFoundException: destinationPath was not found on the remote host.
SshException: If a problem occurs while copying the file.

UploadFile(Stream, string, Action<ulong>?)

Uploads stream into remote file.

public void UploadFile(Stream input, string path, Action<ulong>? uploadCallback = null)

Parameters

input Stream: Data input stream.
path string: Remote file path.
uploadCallback Action<ulong>: The upload callback.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

Exceptions

input is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to upload the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.

The method was called after the client was disposed.

UploadFile(Stream, string, bool, Action<ulong>?)

Uploads stream into remote file.

public void UploadFile(Stream input, string path, bool canOverride, Action<ulong>? uploadCallback = null)

Parameters

input Stream: Data input stream.
path string: Remote file path.
canOverride bool: if set to true then existing file will be overwritten.
uploadCallback Action<ulong>: The upload callback.

Remarks

Method calls made by this method to input, may under certain conditions result in exceptions thrown by the stream.

Exceptions

input is null.

path is null or contains only whitespace characters.

Client is not connected.

Permission to upload the file was denied by the remote host.

-or-

A SSH command was denied by the server.

A SSH error where Message is the message from the remote host.