Namespace Amazon.SecretsManager.Model

Classes

Container for the parameters to the CancelRotateSecret operation. Disables automatic scheduled rotation and cancels the rotation of a secret if currently in progress.

To re-enable scheduled rotation, call RotateSecret with

AutomaticallyRotateAfterDays

set to a value greater than 0. This immediately rotates your secret and then enables the automatic schedule.

note

If you cancel a rotation while in progress, it can leave the

VersionStage

labels in an unexpected state. Depending on the step of the rotation in progress, you might need to remove the staging label

AWSPENDING

from the partially created version, specified by the

VersionId

response value. You should also evaluate the partially rotated new version to see if it should be deleted, which you can do by removing all staging labels from the new version

VersionStage

field.

To successfully start a rotation, the staging label

AWSPENDING

must be in one of the following states:

Not attached to any version at all
Attached to the same version as the staging label
```
AWSCURRENT
```

If the staging label

AWSPENDING

attached to a different version than the version with

AWSCURRENT

then the attempt to rotate fails.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:CancelRotateSecret

Related operations

To configure rotation for a secret or to manually trigger a rotation, use RotateSecret.
To get the rotation configuration details for a secret, use DescribeSecret.
To list all of the currently available secrets, use ListSecrets.
To list all of the versions currently associated with a secret, use ListSecretVersionIds.

CancelRotateSecretResponse: This is the response object from the CancelRotateSecret operation.

CreateSecretRequest

Container for the parameters to the CreateSecret operation. Creates a new secret. A secret in Secrets Manager consists of both the protected secret data and the important information needed to manage the secret.

Secrets Manager stores the encrypted secret data in one of a collection of "versions" associated with the secret. Each version contains a copy of the encrypted secret data. Each version is associated with one or more "staging labels" that identify where the version is in the rotation cycle. The

SecretVersionsToStages

field of the secret contains the mapping of staging labels to the active versions of the secret. Versions without a staging label are considered deprecated and not included in the list.

You provide the secret data to be encrypted by putting text in either the

SecretString

parameter or binary data in the

SecretBinary

parameter, but not both. If you include

SecretString

SecretBinary

then Secrets Manager also creates an initial secret version and automatically attaches the staging label

AWSCURRENT

to the new version.

note

If you call an operation to encrypt or decrypt the
```
SecretString
```
or
```
SecretBinary
```
for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias
```
aws/secretsmanager
```
. If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS creating the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
If the secret resides in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the
```
KMSKeyId
```
. If you call an API that must encrypt or decrypt
```
SecretString
```
or
```
SecretBinary
```
using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:CreateSecret
kms:GenerateDataKey - needed only if you use a customer-managed AWS KMS key to encrypt the secret. You do not need this permission to use the account default AWS managed CMK for Secrets Manager.
kms:Decrypt - needed only if you use a customer-managed AWS KMS key to encrypt the secret. You do not need this permission to use the account default AWS managed CMK for Secrets Manager.
secretsmanager:TagResource - needed only if you include the
```
Tags
```
parameter.

Related operations

To delete a secret, use DeleteSecret.
To modify an existing secret, use UpdateSecret.
To create a new version of a secret, use PutSecretValue.
To retrieve the encrypted secure string and secure binary values, use GetSecretValue.
To retrieve all other details for a secret, use DescribeSecret. This does not include the encrypted secure string and secure binary values.
To retrieve the list of secret versions associated with the current secret, use DescribeSecret and examine the
```
SecretVersionsToStages
```
response value.

CreateSecretResponse: This is the response object from the CreateSecret operation.

DecryptionFailureException: Secrets Manager can't decrypt the protected secret text using the provided KMS key.

DeleteResourcePolicyRequest

Container for the parameters to the DeleteResourcePolicy operation. Deletes the resource-based permission policy attached to the secret.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:DeleteResourcePolicy

Related operations

To attach a resource policy to a secret, use PutResourcePolicy.
To retrieve the current resource-based policy that's attached to a secret, use GetResourcePolicy.
To list all of the currently available secrets, use ListSecrets.

DeleteResourcePolicyResponse: This is the response object from the DeleteResourcePolicy operation.

DeleteSecretRequest

Container for the parameters to the DeleteSecret operation. Deletes an entire secret and all of its versions. You can optionally include a recovery window during which you can restore the secret. If you don't specify a recovery window value, the operation defaults to 30 days. Secrets Manager attaches a

DeletionDate

stamp to the secret that specifies the end of the recovery window. At the end of the recovery window, Secrets Manager deletes the secret permanently.

At any time before recovery window ends, you can use RestoreSecret to remove the

DeletionDate

and cancel the deletion of the secret.

You cannot access the encrypted secret information in any secret that is scheduled for deletion. If you need to access that information, you must cancel the deletion with RestoreSecret and then retrieve the information.

note

There is no explicit operation to delete a version of a secret. Instead, remove all staging labels from the
```
VersionStage
```
field of a version. That marks the version as deprecated and allows Secrets Manager to delete it as needed. Versions that do not have any staging labels do not show up in ListSecretVersionIds unless you specify
```
IncludeDeprecated
```
.
The permanent secret deletion at the end of the waiting period is performed as a background task with low priority. There is no guarantee of a specific time after the recovery window for the actual delete operation to occur.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:DeleteSecret

Related operations

To create a secret, use CreateSecret.
To cancel deletion of a version of a secret before the recovery window has expired, use RestoreSecret.

DeleteSecretResponse: This is the response object from the DeleteSecret operation.

DescribeSecretRequest

Container for the parameters to the DescribeSecret operation. Retrieves the details of a secret. It does not include the encrypted fields. Secrets Manager only returns fields populated with a value in the response.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:DescribeSecret

Related operations

To create a secret, use CreateSecret.
To modify a secret, use UpdateSecret.
To retrieve the encrypted secret information in a version of the secret, use GetSecretValue.
To list all of the secrets in the AWS account, use ListSecrets.

DescribeSecretResponse: This is the response object from the DescribeSecret operation.

EncryptionFailureException: Secrets Manager can't encrypt the protected secret text using the provided KMS key. Check that the customer master key (CMK) is available, enabled, and not in an invalid state. For more information, see How Key State Affects Use of a Customer Master Key.

Filter: Allows you to filter your list of secrets.

GetRandomPasswordRequest

Container for the parameters to the GetRandomPassword operation. Generates a random password of the specified complexity. This operation is intended for use in the Lambda rotation function. Per best practice, we recommend that you specify the maximum length and include every character type that the system you are generating a password for can support.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:GetRandomPassword

GetRandomPasswordResponse: This is the response object from the GetRandomPassword operation.

GetResourcePolicyRequest

Container for the parameters to the GetResourcePolicy operation. Retrieves the JSON text of the resource-based policy document attached to the specified secret. The JSON request string input and response output displays formatted code with white space and line breaks for better readability. Submit your input as a single line JSON string.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:GetResourcePolicy

Related operations

To attach a resource policy to a secret, use PutResourcePolicy.
To delete the resource-based policy attached to a secret, use DeleteResourcePolicy.
To list all of the currently available secrets, use ListSecrets.

GetResourcePolicyResponse: This is the response object from the GetResourcePolicy operation.

GetSecretValueRequest

Container for the parameters to the GetSecretValue operation. Retrieves the contents of the encrypted fields

SecretString

SecretBinary

from the specified version of a secret, whichever contains content.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:GetSecretValue
kms:Decrypt - required only if you use a customer-managed AWS KMS key to encrypt the secret. You do not need this permission to use the account's default AWS managed CMK for Secrets Manager.

Related operations

To create a new version of the secret with different encrypted information, use PutSecretValue.
To retrieve the non-encrypted details for the secret, use DescribeSecret.

GetSecretValueResponse: This is the response object from the GetSecretValue operation.

InternalServiceErrorException: An error occurred on the server side.

InvalidNextTokenException

You provided an invalid

NextToken

value.

InvalidParameterException: You provided an invalid value for a parameter.

InvalidRequestException

You provided a parameter value that is not valid for the current state of the resource.

Possible causes:

You tried to perform the operation on a secret that's currently marked deleted.
You tried to enable rotation on a secret that doesn't already have a Lambda function ARN configured and you didn't include such an ARN as a parameter in this call.

LimitExceededException: The request failed because it would exceed one of the Secrets Manager internal limits.

ListSecretVersionIdsRequest

Container for the parameters to the ListSecretVersionIds operation. Lists all of the versions attached to the specified secret. The output does not include the

SecretString

SecretBinary

fields. By default, the list includes only versions that have at least one staging label in

VersionStage

attached.

note

Always check the

NextToken

response parameter when calling any of the

List*

operations. These operations can occasionally return an empty or shorter than expected list of results even when there more results become available. When this happens, the

NextToken

response parameter contains a value to pass to the next call to the same API to request the next part of the list.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:ListSecretVersionIds

Related operations

To list the secrets in an account, use ListSecrets.

ListSecretVersionIdsResponse: This is the response object from the ListSecretVersionIds operation.

ListSecretsRequest

Container for the parameters to the ListSecrets operation. Lists all of the secrets that are stored by Secrets Manager in the AWS account. To list the versions currently stored for a specific secret, use ListSecretVersionIds. The encrypted fields

SecretString

and

SecretBinary

are not included in the output. To get that information, call the GetSecretValue operation.

note

Always check the

NextToken

response parameter when calling any of the

List*

operations. These operations can occasionally return an empty or shorter than expected list of results even when there more results become available. When this happens, the

NextToken

response parameter contains a value to pass to the next call to the same API to request the next part of the list.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:ListSecrets

Related operations

To list the versions attached to a secret, use ListSecretVersionIds.

ListSecretsResponse: This is the response object from the ListSecrets operation.

MalformedPolicyDocumentException: The policy document that you provided isn't valid.

PreconditionNotMetException: The request failed because you did not complete all the prerequisite steps.

PublicPolicyException: The resource policy did not prevent broad access to the secret.

PutResourcePolicyRequest

Container for the parameters to the PutResourcePolicy operation. Attaches the contents of the specified resource-based permission policy to a secret. A resource-based policy is optional. Alternatively, you can use IAM identity-based policies that specify the secret's Amazon Resource Name (ARN) in the policy statement's

Resources

element. You can also use a combination of both identity-based

and resource-based policies. The affected users and roles receive the permissions that are permitted by all of the relevant policies. For more information, see Using Resource-Based Policies for AWS Secrets Manager. For the complete description of the AWS policy syntax and grammar, see IAM JSON Policy Reference in the IAM User Guide.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:PutResourcePolicy

Related operations

To retrieve the resource policy attached to a secret, use GetResourcePolicy.
To delete the resource-based policy that's attached to a secret, use DeleteResourcePolicy.
To list all of the currently available secrets, use ListSecrets.

PutResourcePolicyResponse: This is the response object from the PutResourcePolicy operation.

PutSecretValueRequest

Container for the parameters to the PutSecretValue operation. Stores a new encrypted secret value in the specified secret. To do this, the operation creates a new version and attaches it to the secret. The version can contain a new

SecretString

value or a new

SecretBinary

value. You can

also specify the staging labels that are initially attached to the new version.

note

The Secrets Manager console uses only the

SecretString

field. To add binary data to a secret with the

SecretBinary

field you must use the AWS CLI or one of the AWS SDKs.

If this operation creates the first version for the secret then Secrets Manager automatically attaches the staging label
```
AWSCURRENT
```
to the new version.
If another version of this secret already exists, then this operation does not automatically move any staging labels other than those that you explicitly specify in the
```
VersionStages
```
parameter.
If this operation moves the staging label
```
AWSCURRENT
```
from another version to this version (because you included it in the
```
StagingLabels
```
parameter) then Secrets Manager also automatically moves the staging label
```
AWSPREVIOUS
```
to the version that
```
AWSCURRENT
```
was removed from.
This operation is idempotent. If a version with a
```
VersionId
```
with the same value as the
```
ClientRequestToken
```
parameter already exists and you specify the same secret data, the operation succeeds but does nothing. However, if the secret data is different, then the operation fails because you cannot modify an existing version; you can only create new ones.

note

If you call an operation to encrypt or decrypt the
```
SecretString
```
or
```
SecretBinary
```
for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias
```
aws/secretsmanager
```
. If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS creating the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
If the secret resides in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the
```
KMSKeyId
```
. If you call an API that must encrypt or decrypt
```
SecretString
```
or
```
SecretBinary
```
using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:PutSecretValue
kms:GenerateDataKey - needed only if you use a customer-managed AWS KMS key to encrypt the secret. You do not need this permission to use the account's default AWS managed CMK for Secrets Manager.

Related operations

To retrieve the encrypted value you store in the version of a secret, use GetSecretValue.
To create a secret, use CreateSecret.
To get the details for a secret, use DescribeSecret.
To list the versions attached to a secret, use ListSecretVersionIds.

PutSecretValueResponse: This is the response object from the PutSecretValue operation.

ResourceExistsException: A resource with the ID you requested already exists.

ResourceNotFoundException: We can't find the resource that you asked for.

RestoreSecretRequest

Container for the parameters to the RestoreSecret operation. Cancels the scheduled deletion of a secret by removing the

DeletedDate

time stamp. This makes the secret accessible to query once again.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:RestoreSecret

Related operations

To delete a secret, use DeleteSecret.

RestoreSecretResponse: This is the response object from the RestoreSecret operation.

RotateSecretRequest

Container for the parameters to the RotateSecret operation. Configures and starts the asynchronous process of rotating this secret. If you include the configuration parameters, the operation sets those values for the secret and then immediately starts a rotation. If you do not include the configuration parameters, the operation starts a rotation with the values already stored in the secret. After the rotation completes, the protected service and its clients all use the new version of the secret.

This required configuration information includes the ARN of an AWS Lambda function and the time between scheduled rotations. The Lambda rotation function creates a new version of the secret and creates or updates the credentials on the protected service to match. After testing the new credentials, the function marks the new secret with the staging label

AWSCURRENT

so that your clients all immediately begin to use the new version. For more information about rotating secrets and how to configure a Lambda function to rotate the secrets for your protected service, see Rotating Secrets in AWS Secrets Manager in the AWS Secrets Manager User Guide.

Secrets Manager schedules the next rotation when the previous one completes. Secrets Manager schedules the date by adding the rotation interval (number of days) to the actual date of the last rotation. The service chooses the hour within that 24-hour date window randomly. The minute is also chosen somewhat randomly, but weighted towards the top of the hour and influenced by a variety of factors that help distribute load.

The rotation function must end with the versions of the secret in one of two states:

The
```
AWSPENDING
```
and
```
AWSCURRENT
```
staging labels are attached to the same version of the secret, or
The
```
AWSPENDING
```
staging label is not attached to any version of the secret.

If the

AWSPENDING

staging label is present but not attached to the same version as

AWSCURRENT

then any later invocation of

RotateSecret

assumes that a previous rotation request is still in progress and returns an error.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:RotateSecret
lambda:InvokeFunction (on the function specified in the secret's metadata)

Related operations

To list the secrets in your account, use ListSecrets.
To get the details for a version of a secret, use DescribeSecret.
To create a new version of a secret, use CreateSecret.
To attach staging labels to or remove staging labels from a version of a secret, use UpdateSecretVersionStage.

RotateSecretResponse: This is the response object from the RotateSecret operation.

RotationRulesType: A structure that defines the rotation configuration for the secret.

SecretListEntry

A structure that contains the details about a secret. It does not include the encrypted

SecretString

and

SecretBinary

values. To get those values,

use the GetSecretValue operation.

SecretVersionsListEntry: A structure that contains information about one version of a secret.

SecretsManagerPaginatorFactory: Paginators for the SecretsManager service

Tag: A structure that contains information about a tag.

TagResourceRequest

Container for the parameters to the TagResource operation. Attaches one or more tags, each consisting of a key name and a value, to the specified secret. Tags are part of the secret's overall metadata, and are not associated with any specific version of the secret. This operation only appends tags to the existing list of tags. To remove tags, you must use UntagResource.

The following basic restrictions apply to tags:

Maximum number of tags per secret—50
Maximum key length—127 Unicode characters in UTF-8
Maximum value length—255 Unicode characters in UTF-8
Tag keys and values are case sensitive.
Do not use the
```
aws:
```
prefix in your tag names or values because AWS reserves it for AWS use. You can't edit or delete tag names or values with this prefix. Tags with this prefix do not count against your tags per secret limit.
If you use your tagging schema across multiple services and resources, remember other services might have restrictions on allowed characters. Generally allowed characters: letters, spaces, and numbers representable in UTF-8, plus the following special characters: + - = . _ : / @.

If you use tags as part of your security strategy, then adding or removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:TagResource

Related operations

To remove one or more tags from the collection attached to a secret, use UntagResource.
To view the list of tags attached to a secret, use DescribeSecret.

TagResourceResponse: This is the response object from the TagResource operation.

UntagResourceRequest

Container for the parameters to the UntagResource operation. Removes one or more tags from the specified secret.

This operation is idempotent. If a requested tag is not attached to the secret, no error is returned and the secret metadata is unchanged.

If you use tags as part of your security strategy, then removing a tag can change permissions. If successfully completing this operation would result in you losing your permissions for this secret, then the operation is blocked and returns an Access Denied error.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:UntagResource

Related operations

To add one or more tags to the collection attached to a secret, use TagResource.
To view the list of tags attached to a secret, use DescribeSecret.

UntagResourceResponse: This is the response object from the UntagResource operation.

UpdateSecretRequest

Container for the parameters to the UpdateSecret operation. Modifies many of the details of the specified secret. If you include a

ClientRequestToken

and either

SecretString

SecretBinary

then it also creates a new version attached to the secret.

To modify the rotation configuration of a secret, use RotateSecret instead.

note

The Secrets Manager console uses only the

SecretString

parameter and therefore limits you to encrypting and storing only a text string. To encrypt and store binary data as part of the version of a secret, you must use either the AWS CLI or one of the AWS SDKs.

If a version with a
```
VersionId
```
with the same value as the
```
ClientRequestToken
```
parameter already exists, the operation results in an error. You cannot modify an existing version, you can only create a new version.
If you include
```
SecretString
```
or
```
SecretBinary
```
to create a new secret version, Secrets Manager automatically attaches the staging label
```
AWSCURRENT
```
to the new version.

note

If you call an operation to encrypt or decrypt the
```
SecretString
```
or
```
SecretBinary
```
for a secret in the same account as the calling user and that secret doesn't specify a AWS KMS encryption key, Secrets Manager uses the account's default AWS managed customer master key (CMK) with the alias
```
aws/secretsmanager
```
. If this key doesn't already exist in your account then Secrets Manager creates it for you automatically. All users and roles in the same AWS account automatically have access to use the default CMK. Note that if an Secrets Manager API call results in AWS creating the account's AWS-managed CMK, it can result in a one-time significant delay in returning the result.
If the secret resides in a different AWS account from the credentials calling an API that requires encryption or decryption of the secret value then you must create and use a custom AWS KMS CMK because you can't access the default CMK for the account using credentials from a different AWS account. Store the ARN of the CMK in the secret when you create the secret or when you update it by including it in the
```
KMSKeyId
```
. If you call an API that must encrypt or decrypt
```
SecretString
```
or
```
SecretBinary
```
using credentials from a different account then the AWS KMS key policy must grant cross-account access to that other account's user or role for both the kms:GenerateDataKey and kms:Decrypt operations.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:UpdateSecret
kms:GenerateDataKey - needed only if you use a custom AWS KMS key to encrypt the secret. You do not need this permission to use the account's AWS managed CMK for Secrets Manager.
kms:Decrypt - needed only if you use a custom AWS KMS key to encrypt the secret. You do not need this permission to use the account's AWS managed CMK for Secrets Manager.

Related operations

To create a new secret, use CreateSecret.
To add only a new version to an existing secret, use PutSecretValue.
To get the details for a secret, use DescribeSecret.
To list the versions contained in a secret, use ListSecretVersionIds.

UpdateSecretResponse: This is the response object from the UpdateSecret operation.

UpdateSecretVersionStageRequest

Container for the parameters to the UpdateSecretVersionStage operation. Modifies the staging labels attached to a version of a secret. Staging labels are used to track a version as it progresses through the secret rotation process. You can attach a staging label to only one version of a secret at a time. If a staging label to be added is already attached to another version, then it is moved--removed from the other version first and then attached to this one. For more information about staging labels, see Staging Labels in the AWS Secrets Manager User Guide.

The staging labels that you specify in the

VersionStage

parameter are added to the existing list of staging labels--they don't replace it.

You can move the

AWSCURRENT

staging label to this version by including it in this call.

note

Whenever you move

AWSCURRENT

, Secrets Manager automatically moves the label

AWSPREVIOUS

to the version that

AWSCURRENT

was removed from.

If this action results in the last label being removed from a version, then the version is considered to be 'deprecated' and can be deleted by Secrets Manager.

Minimum permissions

To run this command, you must have the following permissions:

secretsmanager:UpdateSecretVersionStage

Related operations

To get the list of staging labels that are currently associated with a version of a secret, use
```
DescribeSecret
```
and examine the
```
SecretVersionsToStages
```
response value.

UpdateSecretVersionStageResponse: This is the response object from the UpdateSecretVersionStage operation.

ValidateResourcePolicyRequest: Container for the parameters to the ValidateResourcePolicy operation. Validates the JSON text of the resource-based policy document attached to the specified secret. The JSON request string input and response output displays formatted code with white space and line breaks for better readability. Submit your input as a single line JSON string. A resource-based policy is optional.

ValidateResourcePolicyResponse: This is the response object from the ValidateResourcePolicy operation.

ValidationErrorsEntry: Displays errors that occurred during validation of the resource policy.

Interfaces

IListSecretVersionIdsPaginator: Paginator for the ListSecretVersionIds operation

IListSecretsPaginator: Paginator for the ListSecrets operation

ISecretsManagerPaginatorFactory: Paginators for the SecretsManager service

Table of Contents

Namespace Amazon.SecretsManager.Model

Classes

note

note

note

note

note

note

note

note

note

note

Interfaces